Pool filtration: ACIS technical solutions

Products

Backwel

Cartridge filtration ideal for recycling sand filter water

An ecological and economical all-in-one solution that recovers and re-injects sand filter wash water, which is usually wasted and discharged to the drain. This solution returns the purified water to the pool’s hydraulic circuit.

CARACTÉRISTIQUES

◦ Compact
◦ From C6 to C7, the Backwel range adapts to all pool types and sizes
◦ Compatible with Weltico C6 and C7 classic cartridges
◦ Ø 50 mm inlet and outlet to be glued
◦ Supplied with automatic air vent
◦ Pressure: sand filter discharge < 2 bar

The most ▶ 15-micron degree of filtration
▶ Connects to existing sand filter
▶ Wastewater recycling
▶ Water conservation
▶ Reducing overall water consumption
▶ Environmental sustainability

6 Clone

Pressure cartridge filters: the future of filtration

Developed by the ACIS R&D team, the 6-CLONE filter meets market requirements, providing:

a high degree of filtration (15 microns)
a product in line with the times: compact, customized, eco-friendly
an upgrade replacement from a sand filter to cartridge filtration
a perfect fit for a low power pump = does not require any backwashing

CHARACTERISTICS

Rotating inlet and outlet
For pool sizes 25 to 95m³
A compact system, the 6-Clone is suitable for all plant room specifications
Uses Weltico cartridges (same dimensions) – 15 microns
4 cartridge sizes: C3-C5-C6-C7
Pressure gauge to check operating pressure and clogging
Clear tank to visually inspect any cartridge clogging
reduced water consumption compared to using a traditional filter: no need for any backwashing

The most Fine filtration
Makes handling easy:
- No 6-way valve
- No sand
- Not connected to the sewer system
▸ Option to connect the 6-CLONE to a battery supply (2, 3, 4, 5...)
Option: ▸ Anti-bacterial cartridges

6-clone Plate

Pump and 6-clone filter assembly

CHARACTERISTICS

Pump/filter connection supplied and assembled (Ø50)
Shut-off valve ¼ T
6-Clone cartridge filter
Service pressure: 1.5 bars
Test pressure: 3.5 bars

ALL IN PALL

Ready-to-use filtration system with separate filter

Patented product (no. 175-s902)
Everything you need to control within reach
Range from 10 to 20 m3 maximum
Assembled with 1/4 T stop valve and unions that can be disassembled
HP by-pass as standard

The most Light weight, passes easily through doorways
Decide where to position the filter (separate from the system)
Easy installation and connection
Option: ▸ salt water chlorinator
Option: ▸pH regul

FULL IN PALL

An upgrade to the All in Pall with a pressure cartridge filter included

Range with 3 products to choose from – 10 to 20 m3 max.

Assembled and air-tested, assembly with 1/4 T stop valve and unions that can be disassembled
HP by-pass as standard
Simple set-up and upkeep

The most An ultra compact product
Everything you need to control within reach
Light weight, passes easily through doorways
Significant reduction in electricity consumption: an energy efficient pump is sufficient to ensure the right flow level in the system as the filter does not require any backwashing.
Option: ▸ salt water chlorinator
Option: ▸pH regul